Valve Spring and Retainer Installation

How to install replacement (stock or aftermarket) valve springs and retainers in an Acura Integra. The instructions for this DIY are for B18 engines, but a similar process should apply to most DOHC honda engines.

Type R Valve Cover [DIY]

Do you love the look of the OEM Honda Type R Valve Covers? If you don’t have the funds to buy one, painting your existing valve cover might be your best option! This DIY shows you how to turn your stock valve cover into a Type R replica!

How To Do a Compression Test [DIY]

Here is how you run a compression test. It’s actualy quite simple, but a lot of people skip certain steps and end up getting wacky numbers. Running a compression test should always be done before installing a turbo on motor.

Megan 4-2-1 Header Installation [DIY]

I performed this Megain Header install on a ’98 Civic HX (D16Y5), but the basic premise should be the same for any model. Aside from my SRI (short ram intake), this was my first real “under the car with a wrench” modification. It’s written from a n00b’s perspective (since I am...

Installing Energy Suspension Motor Mounts [DIY]

Factory motor mounts are usually engineered to give the best mix of performance and comfort for the average person. As enthusiasts, however, having a stiffer feeling car, and having less movement in the engine can be a real plus. This DIY will show you how to install Energy Suspension motor mounts.

How to Make CTR Black Housing Headlights [DIY]

Blackhoused headlights are one of the most dramatic, and best looking exterior DIYs you can do to your honda. This DIY is for CTR headlights, but can be used for just about any Honda headlights.